ABRADENT SA

Gesso duro KLASSE 3 per la realizzazione di modelli antagonisti, protesi mobile e protesi scheletrica . Tissotropico per rendere più facile la realizzazione del modello.Caratteristiche:• Impasto cremoso • Elevate caratteristiche meccaniche • Buona riproduzione. Colore e Confezionamento:Giallo: scatola da 20 kg
Dati Tecnici:-Rapporto di miscelazione 28 ml / 100 g gesso-Tempo di lavorazione <5 min-Tempo di presa < 12 " -Espansione a 2 ore <0,15%-Resistenza alla compressione a 1h >30 N/ mm2

Putty addition silicone with 1:1 mixing ratio. HD SIL can be modelled during working and is rigid once hardening is completed, but it keeps the values measured unaltered. Due to its ease of use, it is ideal for the pressed ceramic technique, total prostheses, and masks.

Features:

• High final hardness

• Dimensional stability

• It does not irritate the skin

• Resistant to temperature

Advantages:

• Unalterable over time

• High detail

• Millable

• Low linear retraction

• Easy to use

• No deformation in muffle

HD SIL 90 Shore A Working time at 23°C: 1’ 20’’

HD SIL 70/80 Shore A Working time at 23°C: 1’ 40’’

HD SIL 90 Shore A Working time at 23°C: ≤ 6’

HD SIL 70/80 Shore A Working time at 23°C: ≤ 6’

Packaging:

5 kg A + 5 kg B + 2 measuring spoons

90 Shore A orange

80 Shore A light blue

70 Shore A yellow

Rhein'83 was founded in 1983 and today these products boast several copies worldwide, copies that in many cases mirror the shapes of the objects but not the materials they are made of, so the functional result changes significantly from components to castables.

Research is aimed at studying new products, but also constantly at perfecting the functioning of those that have been in use for years. 

Dental brackets are small mechanisms that are in constant motion and under a lot of unpredictable stress, so they need maintenance and updating. 

Some of the products in the catalogue are made to maintain and restore functionality, in all prostheses, if necessary directly in the mouth of patients. 

Rhein'83's commitment, with its expertise continually enriched by external collaborations with dentists and dental technicians, is to improve current standards and develop new products through original designs.

Dear customers in the canton of Ticino, Abradent SA offers its services as a technical consultant and stockist of all new and replacement Cendres-Metaux components.

Please do not hesitate to contact us if you have any questions. We are here for you, and we thank you for your trust.

ABRADENT SA is a valuable partner for UNOR as a stockist of dental alloys and attachments, from classic spherical anchors to bars and slides.

Attachments such as Ecco, Sfera and Tima just a few kilometres from home, great for the dental laboratory and dentist who will be served immediately.

The Asiga MAX 3D DLP is the world's most advanced laboratory 3D printer offering outstanding productivity in a small footprint. 52µm print accuracy optimised for dental environments in digital dentistry, production of dental orthodontics, removable crown and bridge models, surgical guides, dental models, customised spoons and partial dentures. After extensive in-house testing on a variety of 3D printing systems, the Asiga MAX UV is clearly one of the best desktop 3D printers in terms of print quality and consistency for the dental indications tested.

Proprietary resins:
DentaModel, DentaCast,DentaBase,DentaTooth,DentaForm, DentaGum, DentaGuida, DentalBT, DentaTray, DentalStudy

Available from stock:
Asiga Max Build Tray

In addition, the Asiga printer is compatible with the resins of many other manufacturers as follows:
Argen, Basf, Bego, Dentsply Sirona, Dentona, Detax, DMG, DreveKeystone, Kulzer, GC, Henkel Loctite, Merz NextDent, Photocentric, Power Resins, Saremco, Scheu, Voco and more.

BB Cleaner is exactly the 3D resin cleaner you have been looking for. With its three washing programmes, removable 4-litre basket and the possibility to anchor the print platform to the lid without having to detach the object, BB Cleaner is a real revolution waiting to be discovered.

Professional washing station for simple, safe and thorough cleaning of printed objects without fumes and odours.

The special CLEAN UP cleaner is not isopropanol but a perfectly safe, non-volatile and non-flammable water-based solution available in 10-litre cans.

BB CURE Compact 3D Photopolymeriser 365-405nm 
BB Compact is the photopolymeriser with compact dimensions but incredible performance, thanks to its two wavelengths that irradiate the resins on all six sides. Once you have chosen the right UV power and temperature, complete absence of dispersion layer, perfectly dry and light-cured model, all you have to do is admire the result.

BB MIX MIXER FOR 3D RESINS

extremely compact mixer perfect for even the most viscous resinsaccepts a wide variety of bottle sizes, even squares from 45 to 90 mm in diametertilting system with a high angle of inclination

Idostar Semiflex Acrylic unlike its predecessor QDent has the special feature of being relasable.
Its main characteristic is in its high degree of flexibility just by differentiating thicknesses.
Because of these characteristics, it is possible to create a rigid base and flexible hooks.

The IDOSTAR SEMIFLEX ACRYLIC kit consists of 3 products:
-Pink or transparent powder 225 gr
-Pourable monomer 150 ml
-Self-curing monomer 50 ml

Features
DEI® 30'' is a new spray for the disinfection of medical device surfaces whose main characteristic is to guarantee disinfection from viruses, bacteria, fungi, tuberculosis in a record time of 30 seconds.

Its characteristic speed of action makes DEI® 30'' very convenient, adapting to the need to speed up patient-to-patient surface treatment times. It also allows the treatment of continuously used accessories that with other products would be unusable for at least 15 minutes, which is the average action time of other disinfectants.

Package contents:
1 1-litre bottle with spray applicator
1 5-litre canister.

Advantages

- Broad spectrum of action

- Non-aggressive for the operator and even metal surfaces

- Does not leave halos

- Has a very pleasant citrus scent

- CE-certified in accordance with Medical Device Directive Class IIa

- VAH/DGHM certified

- Tested and conforms to European standards

- Non-aggressive for the operator and even metal surfaces

- Has a very pleasant citrus scent

- VAH/DGHM certified

Efficacy

- Bactericidal

- Mycobacterium terrae

- MRSA

- Candida albicans

- HIV-1

- PRV* (HBV)

- BVDV* (HCV)

- Herpesvirus

- Rotavirus

- Adenovirus

- Bovine coronavirus* (SARS)

- Influenza virus H1N1

Action spectrum in 30"

Bactericidal EN 1040, EN 1276, EN 13727, EN 14561-MRSA, Tuberculocidal EN 14348, Lieviticidal EN 1275, EN 13624, Active on HIV-1, PRV* (HBV model virus), BVDV* (HCV model virus), Herpesvirus, Rotavirus, Adenovirus, Bovine Coronavirus*, Influenza virus H1N1.

*PRV: Hepatitis B model virus

*BVDV: Hepatitis C model virus

PalaXpress KULZER is suitable for a wide range of indications. It can be cast or injected.
With PalaXpress, highly adaptable total prostheses can be made using the injection process. The unique formula of this resin allows for a wide range of processing options.

The Anaxdent New Outline PMMA resin offers a highly flexible solution for the creation of temporary restorations, from single crowns to restorations on systems, mock-ups, occlusal tables, second prostheses, as well as for the support of extensions and repairs. Whether it is conventional processes (casting/injection)

MTC-BB LiquidUP Highly degreasing isopropanol- and alcohol-free cleaner, special water-based formula, non-volatile and non-flammable specially designed to remove surface resin residues from objects printed with dlp or lcd printers, rinsable with water, ideal for dental, jewellery, modelling, industry and others. CleanUP does not contain isopropyl alcohol.
Solution available in 10-litre cans.

Micerium S.p.A. has been operating in the dental industry since the seventies. Since 1995, it has been a producer of the ENAMEL PLUS aesthetic line. In 2008, they introduced ENAMEL PLUS HRi, the world's first composite with the same refractive index as natural teeth. Then, in 2013, they introduced ENAMEL PLUS FUNCTION, the only composite with abrasion similar to natural enamel.

In 2015, Ena White 2.0 was presented, the only toothbrush with whitening gel for professional at-home treatment.

ENAMEL PLUS HRi BIO FUNCTION
ENA FLOW SEALENT BIO
ENAMEL PLUS SHINY
ENA POST FIBER
ENA CEM HF
ENA BOND
ENA ETH
ENA FLOW SEALENT
LIGHT CURING UNIT
ENA MATRIX
TENDER REPAIR
TENDER FIBER
ENAMEL PLUS TEMP
MOCK UP KIT
ENA SOFT
ENA WHITE 2.0
ENA TENDER

ABRADENT SA is the official representative for distribution in the Swiss territory.

Micro-hybrid, radiopaque, light-curing composite, indicated for direct and indirect aesthetic restorations. HRi dentines, optimized in translucency and luminosity, for use with HRi universal enamels (same refractive index as natural enamel for restorations with invisible margins and composite thicknesses close to those of natural enamel). HFO dentines, ideal as a base for generic enamels. Shades UD0 and UD0.5 are dentines developed for patients who require whitening treatments or who already have whitened teeth. 5 g syringe

Loctite KeyModel Ultra resin for 3D printing of dental and orthodontic models. KeyModel Ultra is a light-curing methacrylate-based resin specially designed for 3D printing of high-precision dental models. It is compatible with DLP/LED printers that have a wavelength between 385 and 405nm. In addition, it is also suitable for some monochrome LCD printers.

Asiga's UltraGLOSS™ allows you to 3D print perfectly clear and non-blue clear parts such as surgical guides and alignment splints directly with a polished/prepolished surface eliminating the need for manual post-polishing.

Nextdent resins represent one of the most developed ranges of 3D printing materials on the dental market.

The NextDent Model 2.0 resin is due to its high accuracy and surface finish is used for the production of master models that will offer high accuracy..

Its opacity and 3 colors (peach, white and gray) make model details highly visible and the high surface quality is ideal for digital scanners

Curing time in the 3D LCD light-curing unit: 10 minutes

The internal chamber of this machine has the particularity of being able to work with inert gas inside, which brings several advantages: the nitrogen polymerizer eliminates oxygen, which increases the speed and extent of cross-linking. Furthermore, the migration of harmful materials is significantly reduced, which makes BB Cure N a perfect product for treating biocompatible, dental and medical resins.

The internal chamber of BB Cure N Meccatronicore has a volume of 145x145x120 mm and is ideal for fixing 3D resin printed parts and prototypes, with even small details and complex geometries.

The pieces treated inside the nitrogen polymerizer will be perfect due to the combined work of the 30 LEDs and the heat of the chamber, but also to the more performing LED mapping of the previous models.

Do not underestimate the further professional features of BB Cure N, namely its intelligent protocol system, the update system for curing programs, the LOG feedback and the possibility of working with two different wavelengths (365nm, 405nm) .

It is also available in a nitrogen-free version.

POWER GRIP DENTAL TURBINE
Turbine with Always-Clean technology and Sliding-Ceramic bearings

Powerful-LED optical illumination
The precise and powerful fibre-optic illumination
ensures safe working throughout the entire oral cavity.

Sliding-Ceramic
Ceramic bearings reduce friction and guarantee exceptional reliability over time.
exceptional reliability over time.

AquaGrip
Body made of solid, impact- and scratch-resistant material keeps the weight down.
The AquaGrip surface treatment ensures optimal grip in all conditions of use.

Always-Clean Technology
The Always-Clean system consists of 4 water-cooling nozzles, for optimum working temperature, and 4 additional nozzles protecting the rotor, which release a gentle air pressure, warding off air infiltration.
of air, warding off water infiltration.

Cooling
The integrated water cooling system guarantees an optimum working temperature and a longer service life of the cutters.
longer tool life.

Technical features
Head width Ø12 mm
Head height 13 mm
Inclination 18°
Length 119 mm
Body width Ø16 mm
Optical fibre Yes
SprayIntegrated 4 jets
Locking fresea button
Noise level < 68dB
Maximum speed 380.000 - 420.000 rpm
Operating pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.

Red Ring contra-angle handpiece
Always-Clean Technology and Powerful-LED Optical Illumination

Powerful-LED Optical Illumination
The precise and powerful fibre-optic illumination ensures safe working throughout the entire oral cavity.

Maximum power
The 1:5 ratio guaranteeing a speed of 200,000 rpm allows for effortless work and maximum control.

AquaGrip
Body made of solid, impact and scratch-resistant material keeps the weight down.
The AquaGrip surface treatment ensures optimal grip in all conditions of use.

Always-Clean Technology
The Always-Clean system consists of 4 water cooling nozzles, for
optimum processing temperature, and a further 4 nozzles to protect the rotor,
which release a gentle air pressure, warding off water infiltration.

Cooling
The integrated water cooling system ensures an optimum processing
working temperature and longer tool life.

Technical specifications:
Head width Ø 7 mm
Head height 14 mm
18° inclination
Length 97 mm
Body width Ø 20 mm
Optical fibre Yes
Integrated 4-jet spray
Ratio 1:5
Push-button bur block
Noise level < 68 Db
Maximum speed 200,000 rpm
Working pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.
E-Type INTRAmatic attachment

Blue Ring contra-angle handpiece
with Removable-Head technology and Powerfull-LED optical illumination

Powerful-LED optical illumination
Precise and powerful fibre-optic illumination ensures safe working throughout the entire oral cavity.

Removable-Head technology
Quick removal of the head from the contra-angle handpiece body for more effective lubrication and disinfection and longer instrument life.

Cooling
The integrated water cooling system guarantees an optimal working temperature and longer tool life.

AquaGrip
Body made of solid, impact and scratch-resistant material keeps the weight down.
The AquaGrip surface treatment ensures optimum grip in all conditions of use.

Technical specifications:Head width Ø 9.7 mm
Head height 14.2 mm
18° inclination
Length 94 mm
Body width Ø 20 mm
Optical fibre Yes
Spray Integrated single jet
Ratio 1:1
Push-button bur block
Noise level < 63 dB
Maximum speed 40,000 rpm
Working pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.
E-Type INTRAmatic attachment

Green Ring Surgical Contra-angle
Removable-Head technology, external irrigation and Powerful-LED optical illumination

Powerful-LED optical illumination
Precise and powerful fibre-optic illumination ensures safe working throughout the entire oral cavity.

Maximum torque
The 20:1 ratio, which guarantees a torque of over 75 MPa, allows you to effortless and risk-free work.

Removable-Head technology
Quick removal of the head from the contra-angle handpiece body for more effective lubrication and disinfection and longer instrument life.

AquaGrip
Body made of solid, impact-resistant and scratch-resistant material keeps its weight down.
The AquaGrip surface treatment ensures optimum grip in all conditions of use.

External irrigation
The small head incorporates an external irrigation connection, allowing saline solution to be used as a coolant for increased safety in surgery.

Technical characteristics:
Head width Ø10 mm
Head height 15 mm
18° inclination
Length 96 mm
Body width Ø 20 mm
Optical fibre Yes
External spray
Ratio 20:1
Button cutter block
Torque < 75 Mpa
Noise level < 48 dB
Maximum speed 2,000 rpm
Working pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.
E-Type INTRAmatic coupling

Green Ring Surgical Contra-angle
Outdoor irrigation and Powerful-LED optical lighting

Powerful-LED optical illumination
Precise and powerful fibre-optic illumination ensures safe working throughout the oral cavity.

Maximum torque
The 20:1 ratio, which guarantees a torque of over 75 MPa, allows effortless and risk-free work.

External irrigation
The compact head incorporates the external irrigation connection, allowing the use of
saline solution as cooling, for greater safety in surgery.

AquaGrip
Body made of a solid, impact-resistant and scratch-resistant material keeps its weight down.
The AquaGrip surface treatment ensures optimal grip in all conditions of use.

Technical specifications:
Head width Ø 10 mm
Head height 14 mm
18° angle of inclination
Length 97 mm
Body width Ø 18 mm
Optical fibre Yes
External spray
Ratio 20:1
Button cutter block
Torque < 75 Mpa
Noise level < 48 dB
Maximum speed 2.000 rpm
Working pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.
E-Type INTRAmatic coupling

Straight Handpiece Blue Ring
AquaGrip technology and Powerfull-LED optical illumination

Powerful-LED optical illumination
Precise and powerful fibre-optic illumination ensures safe working throughout the entire oral cavity.

AquaGrip
Body made of robust, impact-resistant and scratch-resistant material allows contain the weight.
The AquaGrip surface treatment ensures optimal grip in all conditions of use.

Cooling
The integrated water-cooling system ensures optimal working temperature and longer tool life.

Technical specifications:
Head width Ø 9.7 mm
Head height 14.2 mm
18° inclination
Length 94 mm
Body width Ø 20 mm
Optical fibre Yes
Integrated single-jet spray
Ratio 1:1
Button-operated cutter block
Noise level < 63 dB
Maximum speed 40.000 rpm
Working pressure 2.8 - 3.0 Kpa
Air consumption 56 NL/min.
E-Type INTRAmatic attachment

Rhein83 Switzerland presents OT Equator, a low and narrow profile titanium attachment, available for all implant platforms. OT Equator is the smallest binding available on the market today.

The maximum vertical dimension (attachment + retentive cap and metal container) is only 2.1 mm with a diameter (attachment + retentive cap and metal container) of 4.5 mm.

This product, depending on the prosthetic project, offers ample possibilities to plan various types of overdenture solutions and treatments.

Each OT Equator attachment is available in different gingival heights, depending on the implant platform, starting from a minimum of 0.5 mm up to a maximum of 7.0 mm for internal hexagon implants and from 2 mm to 7 mm for external hex implants. It is also produced for "unknown" implants about which the dentist has no information!

OT EQUATOR Rhein 83 and Megagen

OT EQUATOR retentive caps for Rhein 83 and Megagen, with 4 levels of retention, depending on the color the degree of retention changes. Black cap without retention, to be used as a work guide in the laboratory.

Graphene is a nanomaterial that is synthesized from carbon to obtain mechanical and biological improvements. Compared to conventional polymeric materials, it presents a greater modulus and specific resistance thanks to the distribution of tensions between the structures, the latter will thus be able to withstand stress without undergo deformations. The union between the nanoreinforcement and the polymer matrix is ​​one of the critical aspects that explain the increase in mechanical properties in this type of composite materials.

 The 98.5 or 95 CAD-CAM pods in PMMA loaded with graphene in the monochrome and multichrome modes which aim to simplify the transmission of the background colors of the restorations with the aim of obtaining the naturalness of the prosthetic restorations by imitating the optical effects of the pieces natural.

G-CAM is available in 9 main shades according to the VITA Classical guide: A1, A2, A3, A3.5, B2, C2, CL2, transparent and pink, from 14 mm to 30 mm.

CROWNTEC SAREMCO is a composite resin for definitive bridges and crowns in class A2, of exceptional quality and radiopaque, ideal for the creation of highly biocompatible permanent restorations.

It can also be used for temporary elements such as bridges and All-On-X implant technique.

• for permanent crowns, inlays, onlays, veneers and artificial teeth

• highly aesthetic single-phase material with perfectly matched opacity

• outstanding biocompatibility: no aqueous soluble substances

• ready for use quickly without much stirring

• flexural strength > 135 MPa

• E-modulus: > 4000 MPa

• suitable for 3D LCD/DLP machines 385 or 405 nm

Order unit: Bottle

Contents: 500 g

VITA shades:

• REF 8052 A2 | In stock

• REF 8066 SW | In stock

Caratteristiche principali:

• Elevata resistenza termica: resiste a temperature elevate, perfetto per creare parti funzionali stampate in 3D per applicazioni ingegneristiche.

• Elevata resistenza meccanica: goditi la sicurezza di parti stampate in 3D resistenti e robuste, con eccezionali proprietà meccaniche.

Resistenza certa: trova il giusto equilibrio tra resistenza e flessibilità per progetti ingegneristici versatili.

Specifiche tecniche:

• Peso: 1 kg per bottiglia

• Densità: 1,1 g/cm3

• Viscosità: 230 cP

• Durezza superficiale: 79 Shore D

• Sollecitazione di trazione a rottura: 25 MPa

• Modulo di trazione: 900 MPa

• Allungamento a rottura: 20%

• Impatto Izod intagliato: 6,31 J/m

• Temperatura di esercizio a 0,45 MPa: 80°C

Gingiva Mask Resin è un materiale morbido con elevata elasticità e stabilità dimensionale, specificamente progettato per l'odontoiatria. È facile da tagliare nella forma desiderata e mostra un'eccellente stabilità del colore.

Utilizzata principalmente in associazione a modelli dentali, la Gingiva Mask Resin è adatta per la stampa di tessuto gengivale su modelli di impianti dentali e modelli di ponti e corone. Realizzata per simulare l'aspetto e la sensazione dei tessuti molli orali, consente al tecnico di adattare perfettamente le protesi in base alle condizioni intraorali
del paziente.


Ideale per la stampa:

Tessuti gengivali per l'adattamento delle protesi dentarie
Simula accuratamente i tessuti molli orali
Elevata elasticità e stabilità dimensionale
Eccellente stabilità del colore
Facile da tagliare e rifinire