Building Waterproofing: Sustainably Drying Out Buildings
Damp walls in older buildings are a persistent issue: moisture often seeps from the groundwater into the walls, endangering both the building's structural integrity and your health. As of 2026, modern building waterproofing methods offer reliable solutions for drying out buildings in the long term. Find out which methods are suitable and what costs you can expect.
Key Facts at a Glance
The most important figures and facts about building waterproofing summarized:
- Cost benchmark
- Prices vary greatly depending on the method: injections are usually significantly cheaper than complex external waterproofing involving earthworks.
- Lifespan
- Professionally executed external waterproofing protects the building for 30 to 50 years.
- Swiss standard
- The SIA standard 272 (as of August 2024) is authoritative for underground structures.
- Main causes
- Missing horizontal barriers, pressing groundwater, and heavy rain are the most common reasons for damp basements.
- Health risk
- Persistent moisture promotes mold, which can strain the respiratory tract.
Early intervention prevents expensive consequential damage to the building structure.
Important Technical Terms
Horizontal barrier
A layer in the masonry that prevents the capillary rise of moisture from the ground.
Vertical barrier
An area-wide waterproofing of the external walls that protects against laterally penetrating water (e.g., seepage water).
White tank
A basement made of water-impermeable concrete (WU concrete) that does not require an additional external waterproofing layer.
Black tank
A waterproofing method in which the exterior of the building is protected from water with bitumen sheets or coatings (black).
These terms will help you better understand the quotes from tradespeople.
Comparison of Building Waterproofing Methods
External Waterproofing (Black Tank)
When suitable
Ideal if the house is being excavated anyway or if there is pressing water from the outside.
Costs and time required
Cost-intensive (approx. 1 000 CHF per running meter). The time required is high due to the necessary earthworks.
Risks and disadvantages
Landscaping or paving around the house must be temporarily removed.
Who should do it
Exclusively professional construction companies (structural builders).
Injection Method (Horizontal Barrier)
When suitable
When moisture rises via capillary action from below because the barrier layer is missing or defective.
Costs and time required
Around 200 to 300 CHF per running meter. Usually feasible within a few days.
Risks and disadvantages
If there are many cavities in the masonry, the injection material can distribute unevenly.
Who should do it
Specialized waterproofing companies.
Internal Waterproofing and Restoration Plaster
When suitable
When external excavation is not possible (e.g., due to overbuilding by garages).
Costs and time required
Cheaper than external waterproofing and involves a moderate amount of time.
Risks and disadvantages
The moisture remains in the outer masonry, which can lead to structural damage in the event of frost.
Who should do it
Specialist companies for building protection or experienced plasterers.
Step by Step to a Dry Property
Professional building waterproofing requires a systematic approach. This is how a typical renovation works:
1
Conduct damage analysis
An expert measures the moisture in the masonry and determines the exact cause (e.g., groundwater, defective pipes, or condensation).
2
Create renovation concept
Based on the analysis and the Swiss standard SIA 272, the appropriate waterproofing system is selected.
3
Preparatory measures
Furniture and wall coverings are removed. For external waterproofing, the soil around the foundation is excavated.
4
Apply waterproofing
The chosen system (e.g., bitumen sheets, sealing slurries, or injections) is professionally applied.
5
Drying and follow-up check
Building dryers extract the remaining moisture from the masonry. Finally, the success is verified by renewed measurements.
Safety notice: In case of visible mold growth, you should consult a professional immediately to minimize health risks.
Frequently Asked Questions About Building Waterproofing
Costs vary greatly depending on the chosen method, accessibility of the building, and the condition of the masonry. While injection methods are usually cheaper, the necessary earthworks for external waterproofing drive the price up significantly. You can find specific benchmark values for the individual methods in the method comparison above.
According to experts, a professionally executed external waterproofing generally lasts 30 to 50 years.
The SIA standard 272, revised in August 2024, defines the standards for waterproofing and drainage of underground structures in Switzerland.
While small cracks can be sealed by experienced DIY enthusiasts, full-surface waterproofing or injections should strictly be carried out by professionals. Mistakes can endanger the structural integrity.
Natural hazard damage caused by sudden flooding is often covered by building insurance. However, gradually rising dampness or construction defects are usually excluded.
For a binding cost estimate, an assessment by a local specialist company is always recommended.
