Siam rimasti sorpresi dalla ditta Tetti Forster in quanto dopo un veloce sopraluogo, preventivo dopo pochi giorni e tetto piano di 150 mq rifatto dall'isolazione alla lattoneria in meno di 2 settimane. Complimenti

precisi, gentili e veloci, tutto al giusto prezzo!

Azienda professionale e valida

Posso solo comunicare che è un'ottima ditta, lavori molto professionali, la consiglio.......!

A Swiss company that has been active for 40 years (1982 - 2022) in the field of building and street decoration products. Thanks to the quality of our products, as well as the careful selection of first-class suppliers, we have succeeded over the years in establishing ourselves and conquering the Swiss and international markets. Our strong point is our aluminium profiles: we have designed, developed and patented them; this allows us to meet the needs of our demanding customers by offering customisable products. Thanks to our constant striving for improvement, as well as the study and development of our products, we are proud to have been able to obtain: the SWISS LABEL mark and the TÜV quality mark , later replaced in 2020 by the EN 1090 Certification ( CE marking ): conformity of factory production control for metal products with structural uses. In Ticino, we represent company such as Büwa (modular partitions for WCs and lockers), Renz (letterboxes and mail distributors), Kern-Studer (cellar partitions), Pratic (pergolas and awnings), Emco (doormats and technical mats) and St. Vitrinen (noticeboards, display cases and showcases). Our production is split into 6 different product families : - "LaTettoia” (shelter systems): carports, entrance, stair and passageway covers, bus shelters, terrace covers, Smoking Points, sports bench covers; - "Ciclopark" (articles for slow mobility): shelters for cycles and motorbikes, parking systems for bicycles and scooters and charging and maintenance stations; - “Berbox" : mail post box; - 'Gaia Line' : wardrobe furniture, outdoor furniture components and protective screens; - "Trenntop" : cellar and multifunctional partitions; - "Stendi" : universal clotheslines. LA TETTOIA CARPORT Carports to suit every aesthetic taste and requirement: cantilever, lean-to, single or modular etc. The structures are similar, what changes is the shape of the roof (arched, flat, pyramidal or with different shapes and architectural features) and the material used (compact or structural Plexiglas sheets, polycarbonate, trapezoidal sheet metal and modular aluminium slats). ENTRANCE SHELTERS Every structure, building or entrance is different; this is why our covers adapt to the stylistic tastes of our customers, whether in terms of the material used (compact/structural Plexiglas sheets or laminated glass sheets), the type of wall anchoring (from a minimal and discreet fixing, to a decorative structure) or the shape required ( arched, flat, pyramidal or with diversified shapes and architectural features). TERRACE COVERS All our terrace covers are ideal for protecting your patio from sun and weather. They can be either lean-to or free-standing, depending on the request, and come with a set of accessories: closing walls, lighting, drainage channel, etc. WALKWAY AND STAIRWAY SHELTERS We have developed covers designed for the protection of walkways and stairs in public or private environments, to provide protection where required. Our coverings can be made of compact or structural Plexiglas sheets, vaulted, flat, pyramidal or with different shapes and architectural features. LETTERBOX & CHECKOUT COVERS We have used our knowledge to adapt our covers to letterbox and automatic checkout systems. They are suitable for both private and public places. For each construction, we guarantee design according with current standards. BUS SHELTERS Our bus shelters are varied to suit different locations. Using different roof shapes and materials, the design phase is very important and takes into account the SIA regulations of the location for which they are intended. MULTIFUNCTIONAL FENCES Fences with a tasteful design, ideal for visual screening, decorative fencing and dividing walls. Great for protecting a private space, but also suitable for separating public property. SMOKING POINT Sheltered smoking area for outdoors. Elegant cylindrical or cubic design, perfect for restaurants, bars, offices, public and private companies, banks, hospitals, etc. The supporting structure is made of extruded aluminium profiles, the infill with compact Plexiglas and the protective cover is made of synthetic resin panels.

Isotech Ticino SA A company with more than 60 years of experience in the construction industry, and particularly in waterproofing. In the course of six decades of activity, the company has significantly expanded its client base and the services it offers to them, and today also deals with many other sectors. Bituminous waterproofing Liquid plastic waterproofing Working joints Mastic joints Rigid waterproofing Injections Concrete restoration Static reinforcement with carbon slats Fire protection Anti-vibration carpets Anti-seismic carpets Flooring Draining natural stone paving Footpaths for old people's homes Anti-trauma flooring for playgrounds Flooring for Street Workout and Parkour Anti-trauma flooring for courtyards and gardens Sports Flooring Synthetic Grass Sports Flooring Gymnasium and Crossfit flooring Sports flooring for terraces and flat roofs Industrial flooring Giomoflex® granulate flooring Sports flooring for padel Drone surveys Project assistance

GEMAR Sagl is a woodworking and renovation company based in the heart of Ticino. With years of experience in the industry, we are dedicated to executing tailor-made projects, providing high-quality services in various areas. Our expertise in woodworking allows us to create customized solutions that meet the specific requirements of our clients. We craft bespoke furniture, undertake carpentry works, and execute design projects that reflect the beauty and functionality of wood. In the realm of flooring, we specialize in installing high-quality parquet that adds warmth and style to spaces. Our experience also extends to laying tiles, offering durable and aesthetically pleasing solutions for floors and coverings. Beyond woodworking and flooring, we also handle drywall projects to create internal partitions, decorative ceilings, and insulation solutions. Drywall is a versatile material for us, enabling the realization of functional and aesthetically pleasing spaces. Our experienced team can manage the entire renovation process, ensuring excellent results and adhering to the highest quality standards. We are committed to providing a comprehensive service, from design to implementation, ensuring customer satisfaction. Trust GEMAR Sagl to bring your ideas to life , creating unique and inviting spaces that reflect your style and needs. Our passion for excellence is reflected in every detail of our projects.

Stella Ponteggi, has been active in the scaffolding-laying construction industry in Ticino since 2002. Hildebrand Norbert, the founder of the same, has been working in the field of polyconstruction at the best Swiss companies since 1986 distinguishing himself by his enormous aptitude for the profession, gaining experience, methodology and dedication to quality and professional seriousness. Over the past decade we have equipped ourselves with specific scaffolding and equipment, and have developed such experience that we can offer you the design and installation of any type of scaffolding and scaffolding. Our specialization, in addition to ordinary facade scaffolding, with an availability of about 80,000 m2, is the erection of special and special scaffolding ( suspended, bell towers, bridges, multi-directional surfaces, temporary roofs, etc. ) where for many companies it is unthinkable to lay a scaffold or scaffolding. In order to be able to develop scaffolding of such technical complication and ensure an optimal level of quality and safety, our technicians have either an SFIVET (Federal Institute for Vocational Training) diploma or a FTA (Federal Certificate of Proficiency) or PERCOS (Occupational Safety Contact Person). Our team leaders, too, have diplomas (AFC or equivalent) so that they can ensure proper and accurate execution of erections, as well as knowledge of the rules dictated by federal and cantonal regulations on site safety and scaffolding regulations. All our managers periodically attend continuing education courses organized by SISP/SGUV (Siciety of Swiss Scaffolding Contractors) - Polybau AG (Training Service for Building Development Professions) - SBB (Swiss Federal Railways) - SUVA. The equipment and material we use is certified and compliant with Swiss regulations. (available in the forms area) " Each case its own solution" Over the years we have equipped ourselves with specific materials and equipment to meet most of your needs, especially complicated and almost impossible structures. Our offerings range from: - Inspections, technical and administrative advice to evaluate the optimization of the construction site - Customized design and estimates - Scaffolding for facades, with load capacities from 200 - 600 kg/m2 - Scaffolding for tinsmiths or carpenters - Protections for flat or pitched roofs, fixed or movable - Stair towers - Mobile scaffolding on wheels or rails - Modular scaffolding for tunnels or tunnels - Special or multi-directional scaffolding - Suspended scaffolding - Loading platforms of different capacities - Horizontal and vertical mobile loading platforms - Walkways and temporary bridges - Temporary roofs - Anti-fall safety nets - Scaffolding scenich

Super Service und professionell. Konnten jedes Problem innert kürzester Zeit kostengünstig lösen. Empfehle ich gerne weiter.

Ringraziamo DaFer per i lavori eseguiti, puntuale e preciso.

A Swiss company that has been active for 40 years (1982 - 2022) in the field of building and street decoration products. Thanks to the quality of our products, as well as the careful selection of first-class suppliers, we have succeeded over the years in establishing ourselves and conquering the Swiss and international markets. Our strong point is our aluminium profiles: we have designed, developed and patented them; this allows us to meet the needs of our demanding customers by offering customisable products. Thanks to our constant striving for improvement, as well as the study and development of our products, we are proud to have been able to obtain: the TÜV quality mark for several products and the SWISS LABEL mark . An important recognition obtained in 2020 is the EN 1090 Certification (CE marking): conformity of factory production control for metal products with structural uses. In Ticino, we represent company such as Büwa (modular partitions for WCs and lockers), Renz (letterboxes and mail distributors), Kern-Studer (cellar partitions), Pratic (pergolas and awnings), Emco (doormats and technical mats), St. Vitrinen (noticeboards, display cases and showcases) and recently we also became representatives of the Helios company (street furniture). Our production is split into 6 different product families : - "LaTettoia” (shelter systems): carports, entrance, stair and passageway covers, bus shelters, terrace covers, Smoking Points, sports bench covers; - "Ciclopark" (articles for slow mobility): shelters for cycles and motorbikes, parking systems for bicycles and scooters and charging and maintenance stations; - “Berbox" : mail post box; - 'Gaia Line' : wardrobe furniture, outdoor furniture components and protective screens; - "Trenntop" : cellar and multifunctional partitions; - "Stendi" : universal clotheslines. LA TETTOIA CARPORT Carports to suit every aesthetic taste and requirement: cantilever, lean-to, single or modular etc. The structures are similar, what changes is the shape of the roof (arched, flat, pyramidal or with different shapes and architectural features) and the material used (compact or structural Plexiglas sheets, polycarbonate, trapezoidal sheet metal and modular aluminium slats). ENTRANCE SHELTERS Every structure, building or entrance is different; this is why our covers adapt to the stylistic tastes of our customers, whether in terms of the material used (compact/structural Plexiglas sheets or laminated glass sheets), the type of wall anchoring (from a minimal and discreet fixing, to a decorative structure) or the shape required ( arched, flat, pyramidal or with diversified shapes and architectural features). TERRACE COVERS All our terrace covers are ideal for protecting your patio from sun and weather. They can be either lean-to or free-standing, depending on the request, and come with a set of accessories: closing walls, lighting, drainage channel, etc. WALKWAY AND STAIRWAY SHELTERS We have developed covers designed for the protection of walkways and stairs in public or private environments, to provide protection where required. Our coverings can be made of compact or structural Plexiglas sheets, vaulted, flat, pyramidal or with different shapes and architectural features. LETTERBOX & CHECKOUT COVERS We have used our knowledge to adapt our covers to letterbox and automatic checkout systems. They are suitable for both private and public places. For each construction, we guarantee design according with current standards. BUS SHELTERS Our bus shelters are varied to suit different locations. Using different roof shapes and materials, the design phase is very important and takes into account the SIA regulations of the location for which they are intended. MULTIFUNCTIONAL FENCES Fences with a tasteful design, ideal for visual screening, decorative fencing and dividing walls. Great for protecting a private space, but also suitable for separating public property. SMOKING POINT Sheltered smoking area for outdoors. Elegant cylindrical or cubic design, perfect for restaurants, bars, offices, public and private companies, banks, hospitals, etc. The supporting structure is made of extruded aluminium profiles, the infill with compact Plexiglas and the protective cover is made of synthetic resin panels. CICLOPARK HOME A series of simple covers for bicycles and motorbikes that meet the needs of the private sector: i.e. economy and space-saving. CITY From the many requests we have received over the past decades, we have developed very different covers, using durable materials, modularity and a variety of accessories. PARKING Parking systems for bicycles and scooters. The special shape of the supports allows bicycles with different wheel thicknesses to be parked. Depending on the space available and the number of items to be stored, we can suggest the Series that best meets your needs. ENERGY The vision of the world is changing: slow mobility is coming into our daily imaginary as an efficient and easy solution to reduce the environmental impact of our travels and, above all, to benefit the physical and mental level. Our company is working to give its customers the tools to live and enjoy in a more conscious way, making the 'green' choice accessible to all. BERBOX Our BERBOX letterboxes are manufactured in accordance with POSTA CH regulations. The different lines enable you to adapt them perfectly to your style: classic with more rounded lines or modern with a minimal formal cleanliness. To keep up with the times, we have also created an XL line that can hold packages brought to you by courier, without the need to deliver them in person. TRENNTOP Developed as basement partitions for apartment blocks, they have also satisfied those customers who required a multifunctional separation for interior spaces. Our modular element system is made of supporting structures made of natural anodised aluminium profiles prepared to contain closing panels and the insertion of access doors. The panels can be made of white bilaminate chipboard (TRENNTOP PANELS) or wire mesh (TRENNTOP GITTER). The doors are complete with sturdy hinges and lock for cylinder or padlock closure. GAIA FURNISHINGS AND CLOAKROOMS GAIA-LINE is a programme of components for wardrobes and changing room furniture. Thanks to our many years of experience in the business, we have designed a new line that is simple, elegant and complete. The design, flexibility, ease of assembly and installation, quality in the details as well as the choice of colour, guarantee this product a superior quality. The items in the GAIA-LINE programme can be supplied as individual components or custom-assembled. All steel parts are coated with epoxy powder, while the aluminium profiles and hooks are natural colour anodised. The wooden slats are lacquered beech. OUTDOOR FURNITURE The simple, linear design of GAIA-LINE benches coincides with the equal simplicity of its components. The supports are made of laser-cut and press-folded sheet steel, while the seats can be made of anodised aluminium or precious woods suitable for outdoors. To insure durability, the steel parts are bath-galvanised and epoxy-powder lacquered. The smooth side of the supports is perfectly adapted for customisation with laser-cut names or logos. STENDI Revolutionary universal, modular clothesline, complete with all accessories for the different laying systems. It consists of a natural polished aluminium profile, galvanised and stainless steel components and ABS sliding blocks with integrated roller.