Experts in plumbing, heating, heat pumps and 24/7 emergency service – Bellinzona and Mesocco NEGRETTI IMPIANTI SANITARI E RISCALDAMENTI SAGL , based in Bellinzona with a branch in Mesocco (Italian-speaking Grisons), is a trusted provider of plumbing, heating and energy systems in Ticino and surrounding areas. The company is led by Marco Grassi and is a proud SUISSETEC member . We offer full design, supply, installation and repair services for: • Sanitary systems for bathrooms, showers, kitchens, and changing rooms • Plumbing systems for residential and commercial buildings • Heating systems , including underfloor heating • Cooling, ventilation and air-conditioning systems • High-efficiency heat pump installations • Garden and landscape irrigation systems • Systems with conventional or renewable energy • Emergency support / 24/7 on-call service We use modern technologies and eco-friendly solutions tailored to your needs – for new builds , renovations , or urgent repairs , our team is ready to deliver reliable and efficient service. Contact us for a free quote or urgent support.

In Team Informatica we share a simple philosophy : dedicate our talents and apply our technology to create products and services that can improve the company's business. With almost 40 years of experience we have always been among the most important players in the IT sector for Ticino. Our software solutions are designed to meet the needs of companies of any sector / size and professionals. Products: Financial accounting Payroll accounting Software Swiss Customs Software IME Software logistic and trasnsport Software ERP Software warehouse

Welcome! The much envied position in the town centre and right on the lakeside gives the centenary HOTEL WALTER AU LAC (since 1888, 4th generation Cereda Family) a host of advantages. It is located on the lake promenade and near the traffic-free town centre. All the 38 bedrooms are with lake view and are equipped with every comfort: bath or shower, WC, hairdryer, telephone, radio, TV, safety box, kettle, minibar, air conditioning and WiFi. Reception 24h/24. On the 5th floor panoramic terrace. The breakfast-room with lake view where we serve an inviting buffet, is located on the 1st floor. Ticino Ticket included.

War zur Feriendialyse hier. Bin sehr zufrieden: Dialyse-Schwestern-/Pfleger sehr kompetent und stets freundlich. Angenehmes Ambiente. Fühlte mich gut aufgehoben und würde gerne jederzeit wiederkommen.

Professionale, attento e competente, ha saputo individuare subito i punti di tensione e lavorarci con efficacia

ECAP is a non-commercial and non-profit adult education institute in Switzerland. Headquartered in Zurich, there are nine regional branches throughout Switzerland. With its courses, the intercultural organisation enables the education of migrants and employees in general, including those with little formal education. With more than 50,000 participants per year, ECAP is the second largest adult education institute in Switzerland – and the number one school for German and integration courses. We promote the social and professional integration of migrants through targeted educational opportunities. An up-to-date overview of our training offer can be found in our course programme . Our main activities are: • Courses for the achievement of professional qualification (Art. 33 of the BBG) for construction (bricklayers, plasterer, painter), for sales (detail trade specialist EFZ and retail trade assistant EBA), as well as for metalworkers and blind fitters • Refresher courses for architects, engineers, designers etc. with AutoCAD • Refresher courses in the hotel and catering industry («The ABCs of the hotel industry and catering») • Business management, in cooperation with the Vocational and Trade School (SPAI) in Trevano • Computer science courses (introduction and consolidation in Word, Excel, Access, Internet, PowerPoint) with the possibility of obtaining the «European Computer Driving Licence» (ECDL) • Professional language courses (German and English in sales or commercial areas) with the possibility of obtaining the respective telc certificates • Literacy courses in cooperation with the Association Leggere & Scrivere della Svizzera italiana • Founding of company • Atelier TRI, application techniques for unemployed persons • Italian language courses in various municipalities, with the possibility of obtaining CELI certificates • «Preparatory Examination Courses» for electrical and masonry apprentices, in cooperation with Unia. ECAP Ticino Unia is an accredited examination center for ECDL, CELI A and fide test. Here you can find more information .

The company ER Rental Sagl in Dongio has been in existence for over 10 years and mainly deals with rental and sale of sheds, gazebo, curtain, Cuvemax, Ready box and stage of all sizes for exhibitions, exhibitions, conferences, receptions and inaugurations and boasts a long list of clients between companies and individuals. The tailor-made construction of our PVC products as well as the structural galvanized steel carrier frame is performed completely at our headquarters in Dongio where it is also possible to visit our exhibition. The Director, Mr. Ivano Neri and his associates are always at your disposal for personal advice, gratuities and free estimates. Do not hesitate to contact us for an appointment. We operate throughout Ticino and in particular in the zones of: Dongio, Biasca, Ludiano, Serravalle, Malvaglia, Semione, Acquarossa, Olivone, Bellinzona, Locarno, Lugano, Mendrisio, Chiasso, Ticino, Blenio, Graubünden

sempre a disposizione. per qualsiasi cosa...a volte anche con poco preavviso cercano di aiutarti comunque. Siete quelle piccole realtà che stanno scomparendo....meno male che ci siete voi e che capiate il valore dei soldi...non come certi Garage che pensano solo al profitto

Serietà,disponibilità,professionalità,puntualità e cortesia sono 5 elementi che caratterizzano questa società. Grazie di tutto di cuore.

Paolo Ortelli, born in Mendrisio, Switzerland in 1962. After graduating from high school, he obtained a physiotherapist diploma in Varese, at the Circolo hospital in 1986, then equalized with a Swiss diploma in 1989. Over the years he has always attended specialization courses in various rehabilitation techniques such as Maitland (at the second level, with manipulations and mobilization of the neuro-meningeal system according to Butler), Klein Vogel Bach (or FBL, various courses), Proprioceptive Neuromuscular Facilitation (PNF- Kabath), Lymphatic drainage, Shiatsu and Reflexology (both of the organic and nervous areas), Treatment of trigger points (1 and 2). From 1999 to 2003 he attended and obtained the degree of Doctor in Osteopathy in France and at the Ludes University, in Lugano, and specialized in structural and visceral osteopathy, as well as in Chinese Anthropo-Psychology (APC), and cranio-sacral treatment. and visceral pediatric. He has taught monothematic courses at the same university to Physiotherapy students and is a tutor for trainees in the physiotherapy studio. He is a member of the Swiss Association of Physiotherapists (Physioswiss), section Ticino, of the Swiss Society of Physiotherapists Graduated in Osteopathy (OsteoSwiss), of the Register of Empirical Medicine (RME and ASCA) and secretary of APIS (Swiss Interdisciplinary Posturological Association) In 2007 he also obtained the title as Complementary Therapist. Since then he has also trained in Postural Orthopraxia, Traditional Chinese Medicine and in 2009 he successfully passed the intercantonal examination of Osteopathy, obtaining the title of CDS Osteopath. In the rehabilitation clinic in Via San Gottardo 59, in Balerna, it purely performs treatments in Acupuncture, Physiotherapy, Osteopathy (including pediatric) and Posturology, recognized and reimbursed by basic insurance (physiotherapy subject to medical certificate) and complementary (Acupuncture, APC, TCM, Osteopathy and Posturology, without a doctor's prescription), as well as relaxing massages and lymphatic drainage for the lower limbs and for the whole body in general. Paolo Ortelli, D.O. CDS Osteopath, Doctor of Traditional Chinese Medicine, Specialized in Orthopraxia, Physiotherapist, Complementary Therapist and Posturologist.

OBLIGATORY COURSES FOR THE LICENSE 🏍️⛑️🛵 DRIVING SCHOOL LESSONS 🏍️⛑️🛵 REFRESHER COURSES 🏍️⛑️🛵 MOTORCYCLE TOUR 🏍️⛑️🛵 CONTACTS Being in the hands of an instructor with the right numbers makes a difference! • The only instructor who teaches only motorcycles. • 3500 students • 36 years of experience as an instructor To obtain the A 35 kW license or the A1 subcategory, it is mandatory to complete the basic practical training for motorcycle students (art. 19 OAC) within four months of issuing the learner’s permit. The basic practical training lasts 12 hours and consists of modules 1-2-3, which must be completed in chronological order. Those who obtained the A1 license (before 01/01/2021) and wish to obtain the A 35 kW license must complete the training by only performing module 3 (4 hours). Candidates for the A 35 kW license cannot complete the basic practical training with vehicles of the A1 subcategory. Direct access to the unlimited A category is no longer possible, and one must wait 2 years from obtaining the A 35 kW category. Costs CHF 480.-- Full course 12 hours (modules 1-2-3) CHF 180.-- Module 3 for students who have completed the 8-hour training for the A1 category (modules 1-2) at CorsiMoto CHF 200.-- Module 3 Locations for the mandatory course for categories A1 and A 35 kW Luganese : Lugano - Gravesano - Bioggio Mendrisiotto : Mendrisio - Balerna - Chiasso Bellinzonese : Bellinzona - Camorino - Giubiasco Locarnese : Locarno - Losone - Tenero Riviera : Biasca - Osogna Minimum age for category A1 15 years : Light motorcycle with a maximum speed of 45 km/h (yellow license plate) with a cylinder capacity not exceeding 50 cm³ equipped with a spark-ignition engine or with a nominal power or continuous power of up to 4 kW for other engines. 16 years : Motor vehicles with a cylinder capacity not exceeding 125 cm³ and a maximum engine power of 11 kW. Minimum age for category A 35 kW 18 years : Motor vehicles with an engine power not exceeding 35 kW and a power-to-weight ratio not exceeding 0.20 kW/kg.